2010-2015 Chevrolet Camaro Type-TTII Hood - Anderson Composites - AC-HD1011CHCAM-TTII
Type-TTII carbon fiber hood for 2010-2015 Chevrolet Camaro
Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold, sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. No additional clear coat is required.
Fiberglass "skeleton" bonded to underside of carbon fiber hood for strength and support
Metal mesh screens are removable & paintable
Mounts with OE hardware
Requires hood pins for safety reasons
Do not install gas hood shocks, dampers, or struts
Requires the use of a heat shield
2010-2015 Chevrolet Camaro Type-TTII Hood - Anderson Composites - AC-HD1011CHCAM-TTII
Type-TTII carbon fiber hood for 2010-2015 Chevrolet Camaro
Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold, sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. No additional clear coat is required.
Fiberglass "skeleton" bonded to underside of carbon fiber hood for strength and support
Metal mesh screens are removable & paintable
Mounts with OE hardware
Requires hood pins for safety reasons
Do not install gas hood shocks, dampers, or struts
Requires the use of a heat shield
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Type-TTII carbon fiber hood for 2010-2015 Chevrolet Camaro
Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold, sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. No additional clear coat is required.
Fiberglass "skeleton" bonded to underside of carbon fiber hood for strength and support
Metal mesh screens are removable & paintable
Mounts with OE hardware
Requires hood pins for safety reasons
Do not install gas hood shocks, dampers, or struts
Requires the use of a heat shield
